Ctek D250S/Durite battery split charging systems

The CTek D250S battery charger/splitter obtains its energy from DC sources such as alternators, solar panels or wind power and optimises this power to meet the charging requirements of different battery banks.

Durite battery to battery (DC to DC) split charge systems.

The Durite range of battery to battery chargers have a 3 stage micro-processor controlled charging system and use voltage sensing for automatic cut-in and drop-out battery split charging. The Durite split charge systems are available in 12v to 12v, 24v to 24v, 12v to 24v and 24v to 12v starter and leisure battery bank options and combinations.

Ctek D250S battery to battery charger (DC to DC) split charger.

The Ctek D250S connects to a DC energy source to achieve high efficiency multi-stage charging.
The charger has a temperature sensor which ensures optimal charging voltages at all temperatures. The Ctek D250S ensures that your batteries are always in good condition, quick charging and long battery lifetimes. Fully automatic 5-stage charger that supplies 20A to 12V batteries of 40-300Ah. The charger is IP65 classified (water jet and dust protected and approved for outdoor use), protects vehicle electronics and is suitable for all types of lead-acid batteries (Wet, MF, Gel, AGM). It is supplied with a 2 year guarantee.

All our DC to DC battery split chargers are very simple to fit as these units only needs wiring from the starter battery to the leisure battery. No connection to the alternator is required.

Click on "More details" in the product description to view the recommended cable size etc. to make fitting your split charge relay system easy.

Full, simple to follow fitting instructions for the Ctek D250S and Durite battery to battery chargers are included.

TO ASK A QUESTION ABOUT ANY OF THE PRODUCTS ON THIS PAGE CLICK HERE.

FREE DELIVERY AVAILABLE ON ALL THE PRODUCTS ON THIS PAGE!

!

Durite battery to battery charger
Now Only
!
Durite battery to battery charger
Durite battery to battery charger 
£50 OFF RRP!

Micro processor controlled for fast charging 12v and 24 volt leisure/auxiliary battery systems. Battery banks from 40-500Ah

Micro processor controlled split charge system. Automatic 3 stage charging (constant current, constant voltage and float mode). Charge status LED indicators. Short curcuit protection. Automatic cut in and drop out. Isolates different voltage systems. Output controlled to maximum current. Neat and compact design. Supplied with 4 metres of cable and 2 internal, replaceable fuses.

Available in 4 voltage variations, 12v starter to 12v leisure, 24v starter to 24v leisure, 24v starter to 12v leisure and 12v starter to 24v leisure.

Click on the slide show to view the wiring diagram.

Ctek D250S battery to battery charger
Now Only
!
CTek D250S battery to battery charger
CTek D250S battery to battery charger 

The D250S is a fully automatic 5-stage charger that supplies 20A to 12V batteries of 40-300Ah. EXTRA £10 OFF!

HURRY! LAST FEW LEFT AT THIS PRICE!

The D250S charger obtains its energy from DC sources such as alternators, solar panels or wind power and optimises this power to meet the charging requirements of different battery banks.

The D250S is particularly suitable for charging caravans, motor caravans, boats and second homes that do not have access to grid power supplies. Charging automatically starts as soon as DC energy is provided to the charger, such as from alternators when a vehicle is started.

Very simple to fit. Wiring as per the Durite battery to battery charger above.
Bookmark and Share