Ctek/Durite BATTERY to BATTERY Chargers

PLEASE RING 020 8364 3771 FOR CURRENT PRICES ON THESE PRODUCTS!

NEW WEB SITE OPEN FOR ONLINE SHOPPING! CLICK HERE.

 

!

Ctek D250S Dual 20 amp 12 volt Battery to Battery Charger/Splitter

!
Ctek D250S Dual battery charger 

Ctek D250S Dual. For split charging 12 volt auxiliary/leisure battery systems either from a vehicle alternator or an alternative energy source.

The D250S DUAL charger obtains its energy from DC sources such as alternators, solar panels or wind power and optimises this power to meet the charging requirements of different battery banks. The D250S DUAL automatically selects the best connected DC energy source (of 2) for the purpose and switches between these energy sources to achieve high efficiency multi-stage charging.
The D250S DUAL is particularly suitable for charging caravans, motor caravans, boats and second homes that do not have access to grid power supplies. Charging automatically starts as soon as DC energy is provided to the charger, such as from alternators when a vehicle is started or from solar panels when connected.
The D250S DUAL has a temperature sensor which ensures optimal charging voltages at all temperatures. The D250S DUAL ensures that your batteries are always in good condition, quick charging and long battery lifetimes.
The D250S DUAL is a fully automatic 5-stage charger that supplies 20A to 12V batteries of 40-300Ah. The charger is IP65 classified (water jet and dust protected and approved for outdoor use), protects vehicle electronics and is suitable for all types of lead-acid batteries (Wet, MF, Gel, AGM). It is supplied with a 2 year guarantee.

Easy to fit - simply wire from the starter battery bank (and/or other energy source) to the leisure/auxiliary battery bank!

Dimensions: 192x110x65 mm (LxWxH)

Durite 20 amp 24 volt to 12 volt Battery to Battery Charger/Splitter

!
Durite Battery charger/splitter  

For split charging 24 volt battery starting systems and 12 volt auxiliary/leisure battery systems

Features: microprocessor controlled split charge system - automatic 3 stage charging - charge status LED indicators - short curcuit protection - automatic cut in and drop out - isolates different voltage systems - output controlled to maximum current - will fully charge starter battery/batteries before switching to auxiliary battery bank - can be left permanently connected - neat and compact design - dimensions = 170mm wide x 125 deep x 155 high. Will fast charge auxiliary battery at 20 amps.

Easy to fit - simply wire from the starter battery bank to the leisure/auxiliary battery bank!

Durite 10 amp 12 volt to 24 volt Battery to Battery Charger/Splitter

!
Durite Battery charger/splitter  

For split charging 12 volt battery starting systems and 24 volt auxiliary/leisure battery systems

Features: microprocessor controlled split charging system - automatic 3 stage charging - charge status LED indicators - short curcuit protection - automatic cut in and drop out - isolates different voltage systems - output controlled to maximum current - will fully charge starter battery/batteries before switching to auxiliary battery bank - can be left permanently connected - neat and compact design - dimensions = 170mm wide x 125 deep x 155 high. Will fast charge each auxiliary battery at 10 amps.

Easy to fit - simply wire from the starter battery bank to the leisure/auxiliary battery bank!

Top

Durite 20 amp 12 volt to 12 volt Battery to Battery Charger/Splitter

!
Durite Battery charger/splitter  

For split charging 12 volt battery starting systems and 12 volt auxiliary battery systems

Features: microprocessor controlled split charge system - automatic 3 stage charging (constant current, constant voltage and float mode) - charge status LED indicators - short curcuit protection - automatic cut in and drop out - isolates different voltage systems - output controlled to maximum current - will fully charge starter battery/batteries before switching to fast charge the auxiliary battery bank - can be left permanently connected - neat and compact design - dimensions = 170mm wide x 125 deep x 155 high. Will fast charge auxiliary battery at 20 amps.

Easy to fit - simply wire from the starter battery bank to the leisure/auxiliary battery bank!

Durite 10 amp 24 volt to 24 volt Battery to Battery Charger/Splitter

!
Durite Battery charger/splitter  

For split charging 24 volt battery starting systems and 24 volt auxiliary/leisure battery systems

Features: microprocessor controlled split charging system - automatic 3 stage charging - charge status LED indicators - short curcuit protection - automatic cut in and drop out - isolates different voltage systems - output controlled to maximum current - will fully charge starter battery/batteries before switching to auxiliary battery bank - can be left permanently connected - neat and compact design - dimensions = 170mm wide x 125 deep x 155 high. Will fast charge each auxiliary battery at 10 amps.

Easy to fit - simply wire from the starter battery bank to the leisure/auxiliary battery bank!